5 Easy Fixes to Update Not New Hard Drive Efficiency After System Upgrades

Posted on by Justin

On the next screen, select ‘ Obtain IP Address automatically ‘ and ‘ Obtain DNS Server Address automatically ‘. – Finally close all windows and check if DNS server error is not responding or not.

In the IPv4 Properties tab, select the “Use the following DNS server addresses” box. Drivers are the most important part of any hardware. Your computer’s Network Adapter relies on its driver too. The DNS Server isn’t responding on Windows 7, Windows 8 or Windows 10 can be the result of a faulty or outdated driver. The only thing I skipped was changing the dns server addresses in the modem it self, only because CG3100 doesn’t allow me to change it.

You can also log into your router by typing 192.168.1.1 into your browser and logging in, find the settings for the DNS. Hi, I gave that a go and it doesn’t appear to be doing anything? It came up with the same DNS server not responding error. If one DNS server is not able to solve the error, try using the second one. If both are not working out, check if the website is really down and not a DNS issue at your end.

Change Dns Server

DNS primary server address and secondary server address are switched the other way around in my modem settings. Imagine the delight of technical support person, at least now they know what may be the problem, so of course they come up with the solution. These are the main reasons that might cause the error with your internet connection. If the problem is not resolved try the next solution. Important Tip For most routers or modems , the power switch should be behind or underneath.

Next, tracert [DNS server’s IP (try 8.8.8.8)]. Another way to fix Windows 10 Internet error related to DNS is to automatically identify broken and corrupted Windows settings and repair them.

  • So, tbb.dll download check them and apply the appropriate method to get rid of the situation.
  • Booting your device in Safe Mode can be the simplest way to resolve the DNS server error.
  • In order to proceed with this method, carry out the undermentioned steps.
  • So, follow the steps in order to reset the DNS server manually.
  • A majority of users claim that after booting their device in Safe Mode the DNS error gets eliminated.

Solution 3: Flush Your Dns And Reset Your Dns Settings

I am not even sure that switching DNS server addresses will actually completely solve my issue as Victoria and NSW have the same ones, only the other way around. My modem settings are set for Victoria even though I live in Sydney, NSW. I still shouldn’t have as much of a problem as I do but it definitely contributes to my latency issue. So as their customer trying to help them out ( yet I pay them ), I have pointed them to what I think the problem is as I discovered it by doing my own research.

Whatsoever, in this article, we are going to discuss different troubleshooting steps to fix the error. Before going forward, You must know physical address of Ethernet adapter. There are still other ways to troubleshoot the DNS Server not Responding, but here are some of the most common ways.

Follow the steps to begin and wait for the troubleshooting tests to complete. If this is your situation, I recommend you try other solutions listed in this guide. When connected, try to access the same website to check whether it is accessible or not. You can restart your modem and router if you have one to solve the problem.

Reinstall Network Drivers

The easiest way to do that is with a piece of special software (check out our recommended tool). Simply download and install it, then run a scan and tell it to repair all issues automatically. Your computer will run a lot faster and the Internet issue will be gone. Have you just updated your Windows 10 computer only to find out that you got disconnected from the Internet and can’t connect again because DNS is not responding? In this post, we’ll show you how to fix Windows 10 Internet error related to DNS issues.

Leave a Reply